This is an old revision of the document!
TODO tasks
-
-
Fix Odroid HC1 thermal active→passive nodes, fix missing overrides for default trip points, check how HW behaves with real three trip points (reported by: Bartlomiej Zolnierkiewicz)
Bring Suspend to RAM to Exynos5422 Odroid XU3/XU4/HC1 boards
Artik5: add support for AX88796C SPI Ethernet driver (kernel driver is there, but lacks DT support) (reported by: Marek Szyprowski)
Lack of REGULATOR_ARIZONA_LDO1 in .config on TM2 causes endless loop: (reported by: Marek Szyprowski)
[ 23.819995] arizona spi1.0: Mixer dropped sample
[ 23.937026] arizona spi1.0: Spurious HPDET IRQ
[ 23.937353] arizona spi1.0: Mixer dropped sample
[ 24.052646] arizona spi1.0: Spurious HPDET IRQ
ARTIK 10 support (hw very similar to Odroid XU3/XU4), should be relatively easy to get it supported
Odroid XU1 (Exynos5410): add support for HDMI/Exynos DRM, MFC, GScaller, SYSMMU. In theory only clock definitions are missing to get it working (same HW as in Exynos542x SoCs).
Add Exynos5250 variant to s5p-jpeg driver (very similar to Exynos4210/4412) (reported by: Marek Szyprowski)
runtime pm core: fix race in turning generic power domains off (turning off many devices at once typically leaved power domain turned on) (reported by: Marek Szyprowski)
-
All non-timer IRQs are always triggered on CPU0, not distributed over all active CPUs. This hurts performance especially on systems, where CPU0 is a LITTLE core. (reported by: Marek Szyprowski)
Odroid XU3 with exynos_defconfig reports following warning: “CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x1a)”
-
Feel free to contact the person mentioned as “Reported by” for more details. Also consider credits (Reported-by or Suggested-by).